







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with







See the difference
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in San Antonio?
New window installation in San Antonio typically ranges from $4,500 to $15,000 for a full-home project, with most homeowners spending between $600 and $1,200 per window including labor and materials. A single standard vinyl window replacement averages $450 to $900 installed, while upgrading to impact-resistant windows for hurricane protection pushes the per-window cost to $1,200 to $2,500. The final number depends on window count, frame material, glass package, and whether you’re doing a straight replacement or a full-frame install that requires cutting into stucco or brick.

Key Takeaways
- Full-home window installation in San Antonio runs $4,500 to $15,000 for a typical 8 to 12 window house.
- Per-window pricing lands between $450 and $1,200 for standard vinyl replacements, depending on size and glass options.
- Impact windows cost $1,200 to $2,500 per window and are increasingly common in San Antonio for storm protection and energy savings.
- Labor runs $150 to $300 per window in the San Antonio market, with full-frame installs costing more than pocket replacements.
- Free estimates are standard practice at Sawyer Remodel San Antonio – call (432) 547-6806 to get a written price before any work starts.
New Window Installation Cost Breakdown (2026)
Here’s what San Antonio homeowners can expect to pay for new window installation in 2026, broken down by window type and project scope.
Cost by Window Type
- Vinyl single-hung or double-hung: $450 – $900 per window installed
- Vinyl casement: $550 – $1,000 per window installed
- Vinyl sliding windows: $450 – $850 per window installed
- Aluminum windows: $500 – $950 per window installed
- Wood windows: $900 – $2,000 per window installed
- Fiberglass windows: $800 – $1,800 per window installed
- Impact-resistant vinyl windows: $1,200 – $2,500 per window installed
Cost by Project Type
- Single window replacement (pocket install): $450 – $1,000
- Full-frame window replacement (per window): $700 – $1,500
- Whole-home window installation (8 – 12 windows): $4,500 – $15,000
- New construction window installation (per window): $600 – $1,400
- Impact window installation for a whole home: $8,000 – $25,000
What’s Included in the Price
When we quote window installation in San Antonio, the written price includes the window unit itself, all installation labor, basic interior and exterior trim work, haul-away of the old windows, and sealing and insulation around the frame. You’ll also get the manufacturer’s warranty on the window and a written workmanship guarantee from us. What it typically does not include: repairing rotted framing or water-damaged sills uncovered during installation, which we flag and quote separately before touching anything.
Vinyl vs. Wood vs. Fiberglass: What the Price Difference Buys You
Vinyl dominates the San Antonio market because it handles the heat and humidity well and costs the least. A standard vinyl double-hung from a mid-tier manufacturer like Jeld-Wen or Milgard runs $250 to $450 for the window itself, with the rest being labor and trim.
Wood windows, especially from names like Andersen or Pella, cost more because the material itself is expensive and the install requires more precision. In San Antonio’s climate, wood also demands more maintenance over its life due to UV exposure and occasional heavy rain. Most of our clients who choose wood do it for the look on the front of the house and go with vinyl everywhere else.
Fiberglass sits in the middle. It expands and contracts at nearly the same rate as glass, which means fewer seal failures over time. For San Antonio’s 100-plus-degree summer days followed by 40-degree winter nights, that thermal stability matters. Expect to pay $800 to $1,800 per window installed for fiberglass.

What Affects New Window Installation Pricing in San Antonio
- Frame material. Vinyl is the most affordable and most common in San Antonio. Aluminum runs slightly higher and conducts heat, which matters when your west-facing windows get hammered by afternoon sun. Wood and fiberglass cost the most but offer distinct advantages in looks and longevity.
- Glass package. Single-pane glass is rare in new installs. Double-pane with low-E coating is the standard for San Antonio’s climate and runs $50 to $150 more per window than basic double-pane. Triple-pane adds another $100 to $250 per window but rarely makes financial sense here the way it does up north. Argon or krypton gas fills, which improve insulation, add $30 to $80 per window.
- Window size and shape. A standard 36-by-48-inch window costs far less than a picture window or a custom arch-top. Oversized windows in living rooms often run $1,200 to $2,500 each because of the glass area and the extra hands required for install.
- Installation method. A pocket replacement, where the new window fits inside the existing frame, costs $150 to $300 less per window than a full-frame replacement. But if the existing frame has rot or water damage, common in older homes in areas like Alamo Heights and Monte Vista, a full-frame install is the only correct fix.
- Exterior finish type. San Antonio homes are mostly brick, stucco, or siding, and each changes the install process. Brick veneer requires more careful flashing work. Stucco homes, common in newer developments around Stone Oak and Alamo Ranch, often need stucco patching after the install, which adds $50 to $150 per opening.
- Access and height. Second-story windows cost more to install because of ladder work and fall protection. Expect a $50 to $100 per-window premium on upper floors. Windows that are hard to reach from the outside, like those over a porch roof, add similar costs.
- Permit requirements. Window replacement in San Antonio typically requires a permit when you’re changing the rough opening size. Straight replacements of the same size often don’t need one. Permit fees run $50 to $200 depending on the scope. We handle the paperwork, and it’s included in our written price.
Impact Windows: Worth the Cost in San Antonio?
Impact windows run $1,200 to $2,500 per window installed, which puts a whole-home project at $8,000 to $25,000. That’s a significant step up from standard vinyl. The question we hear from homeowners in San Antonio is whether the cost justifies itself here, especially since the city sits far enough inland that hurricane-force winds are rare.
The honest answer: impact windows are a dual-purpose investment. Yes, they protect against storm debris and forced entry. But in San Antonio, the bigger day-to-day benefit is the laminated glass’s ability to block UV rays and cut noise. Homes near Loop 410, I-10, or the airport see a real difference in interior quiet. The laminated layer also blocks 99 percent of UV, which protects flooring and furniture from San Antonio’s intense sun. Homeowners also report meaningful savings on cooling costs during July and August when their AC runs nearly nonstop.
One more factor: insurance. Many San Antonio homeowners with older single-pane windows are seeing premium increases or deductibles applied to storm damage. Replacing with impact-rated windows can qualify for discounts depending on your carrier. It’s worth a call to your agent before you decide.
Labor Costs for Window Installation in San Antonio
Installation labor for a standard window in San Antonio runs $150 to $300 per window. That covers removing the old window, setting and leveling the new one, insulating the gaps, sealing the exterior, and cleaning up. A two-person crew can typically install 4 to 6 standard windows in a day.
Full-frame installs, which involve tearing out the existing frame down to the rough opening, run $300 to $500 per window in labor. This is the more involved job and it’s what you need when the current frame is compromised. In older San Antonio neighborhoods like Jefferson, Monticello Park, and parts of the near East Side, we regularly find window frames that have been soaking up decades of humidity. A pocket replacement over a rotting frame just hides the problem.
We pay our install crews by the job, not by the hour, so the written price you approve before work starts is the price you pay at the end. If we find hidden damage when the old window comes out, we show you photos, explain the scope change, and get your sign-off before proceeding.
How to Save on New Window Installation
There are legitimate ways to bring the price down without sacrificing the quality of the install, and a few ways that will cost you more later.
- Replace in phases, but plan the whole job up front. If a full-home window installation doesn’t fit the budget this year, start with the windows that leak air or seal the worst, usually west-facing openings in San Antonio. We price the whole project so you know the total, then stage the work in a way that makes sense for your home and your budget.
- Pick vinyl over wood on all but the front elevation. Nobody but you will notice whether the bedroom windows are wood or vinyl from the street. Use wood or fiberglass where curb appeal matters most and vinyl everywhere else. This alone can shave $2,000 to $5,000 off a whole-home project.
- Consider timing. Window installers in San Antonio are busiest in spring and fall when the weather is mild. Scheduling in late fall or winter can sometimes get you better pricing, though the savings are modest. The bigger win is faster scheduling.
- Check for manufacturer rebates. Brands like Andersen, Pella, and Milgard run seasonal promotions, typically $50 to $200 off per window on qualifying orders. We pass those savings through to you directly.
- Look at energy efficiency programs. CPS Energy and the federal government occasionally offer incentives for high-efficiency window replacements. Eligibility changes year to year, so ask during your estimate and we’ll point you toward what’s current.
- Get a written price before any work begins. The surest way to avoid runaway window installation costs is to work with a contractor who puts the price in writing ahead of time. At Sawyer Remodel San Antonio, that’s not an add-on or a favor. It’s how every project runs under The Relay Visibility Guarantee. You see the number, you approve the number, and that’s the number on the invoice.
For a free estimate on new window installation in San Antonio, call (432) 547-6806. We’ll walk the house, measure the openings, and hand you a written price with a line-item breakdown. No pressure, no four-hour waiting windows, and no surprise charges at the end.
FAQs – New Window Installation Cost
How much does it cost to install one window in San Antonio?
A single standard vinyl window installation in San Antonio costs $450 to $900, including the window, labor, trim, and haul-away. Larger or specialty windows run higher, from $900 to $2,500 depending on size, frame material, and glass package. Call (432) 547-6806 for an exact quote on your specific window – estimates are free and the price is written before any work starts.
Is it cheaper to replace all windows at once?
Yes. Replacing all windows in one project usually saves $50 to $100 per window compared to doing them individually, because the crew is already on site, the equipment is set up, and the permitting covers the whole scope. A whole-home installation of 8 to 12 windows in San Antonio runs $4,500 to $15,000. For a detailed breakdown on your home’s window count, call (432) 547-6806.
How much do impact windows cost in San Antonio?
Impact-resistant windows cost $1,200 to $2,500 per window installed in San Antonio, with a whole-home project ranging from $8,000 to $25,000. The laminated glass adds UV protection, noise reduction, and storm safety. We can quote both standard and impact options side by side so you can compare the numbers yourself – just call (432) 547-6806.
How long does window installation take?
A crew of two typically installs 4 to 6 standard windows per day, so a whole-home project of 10 to 12 windows takes two to three days. Full-frame replacements take longer due to the tear-out and trim work, roughly 4 to 6 windows per day depending on access and exterior finish. We’ll give you a schedule with your written quote before any work begins.
Do I need a permit for window installation in San Antonio?
Straight replacements of the same size generally don’t require a permit in San Antonio, but changing the rough opening size does. Permit fees run $50 to $200. We handle all permitting for you and the cost is included in your written quote. Call (432) 547-6806 and we’ll tell you exactly what applies to your project.
Should I repair or replace my windows?
If a window has failed seals, fogging between panes, or a rotting frame, replacement is almost always the better long-term value compared to repeated repairs. A glass replacement for a failed seal costs $200 to $400 per window, but if the frame is 15-plus years old, you’re putting new glass in an old frame that’s already lost its energy efficiency. For a straight answer on what your specific windows need, call (432) 547-6806 for a free assessment.
Why San Antonio Homeowners Choose Sawyer Remodel San Antonio for Window Installation
Window installation is not a side job for us. It’s part of the full remodeling scope we’ve been doing since 2005, and our process reflects that.
Every project runs under The Relay Visibility Guarantee: a live arrival time so you know when the crew will show up, photo updates before and after the work, and a written price in your hands before anything gets ordered or installed. Your invoice is digital, payable from a link, and matches the number you approved. If something isn’t done right, our 365-Day Done Right Promise means we make it right, backed in writing on every project.
You’ll also know exactly who’s walking into your home. Our technicians are background-checked and uniformed, and our phone is answered by a live person 24/7. No voicemail loops, no callback queues, no wondering if your contractor disappeared.
For window materials, we work with manufacturers that stand behind their products, including proven names in the window and exterior space. You choose from known brands with manufacturer warranties, not mystery suppliers, and the install is covered by our own written workmanship guarantee on top of that.
Luca Romano leads Sawyer Remodel San Antonio, and the standard on every job is the same: a written price before work starts, a schedule that’s communicated clearly, and a result that’s done right the first time. Learning more about our New Window Installation in San Antonio service is a good next step, or you can start right at the home page to see the full scope of what we do.
When you’re ready to talk numbers for your San Antonio home, call (432) 547-6806. We’ll walk the property, answer your questions in plain English, and hand you a written quote on the spot. The estimate is free, and there’s zero obligation.
Written by Luca Romano, Owner at Sawyer Remodel San Antonio, serving San Antonio since 2005.
Pricing reflects the San Antonio market as of 2026. Sawyer Remodel San Antonio offers free estimates – call (432) 547-6806.
What Our Customers Say
"Quote was itemized and every change was approved in the app."
- Sasha L."Bathroom remodel. Tile and shower niche are flawless. Updates by text kept me in the loop."
- Hugh P."Floors and paint finished on time. Floors were sanded, stained, and the walls painted without any gaps in the schedule."
- Ron T.











