Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in San Antonio?
Paver driveway installation in San Antonio typically runs $7,000 to $18,000 for a standard two-car driveway, with most homeowners landing between $10,000 and $14,000. The final number depends on square footage, paver type, site prep, and whether you’re replacing an existing driveway or starting from bare ground. Here’s the short version: a basic concrete paver driveway in a neighborhood like Stone Oak or Alamo Ranch usually starts near the bottom of that range, while a larger driveway with natural stone or intricate patterns in Terrell Hills or Olmos Park pushes toward $18,000 and beyond.
At Sawyer Remodel San Antonio, you’ll get a written price before any work starts, so the number you approve is the number you pay. No surprises at the end.
Key Takeaways
- Standard two-car paver driveway in San Antonio: $7,000 – $18,000
- Most common project size (600 – 800 sq ft): $10,000 – $14,000
- Concrete pavers run $8 – $18 per sq ft installed; natural stone runs $15 – $30 per sq ft installed
- Excavation and base prep add $2 – $5 per sq ft over bare ground
- San Antonio’s clay soil and heat make proper base prep non-negotiable
- You’ll get a written quote before work begins, always, with Sawyer Remodel San Antonio
Paver Driveway Installation Cost Breakdown (2026)
Here’s what the numbers actually look like when you break a paver driveway into its component parts. These ranges reflect what we see across San Antonio in 2026, from Leon Valley to Converse to Helotes.
| Line Item | Cost Range (Installed) | Notes |
|---|---|---|
| Site evaluation & measurement | Free | We measure, assess drainage, and quote before you commit |
| Excavation & removal of old driveway | $1,500 – $4,000 | Higher if removing thick concrete; dump fees included |
| Base material (gravel, crushed limestone) | $800 – $2,200 | 4 – 6 inches compacted; San Antonio clay needs proper depth |
| Sand bedding layer | $300 – $800 | 1 inch screeded layer for leveling |
| Concrete pavers (material only) | $3,500 – $9,000 | 600 – 800 sq ft at $5 – $12 per sq ft depending on style |
| Natural stone pavers (material only) | $6,000 – $18,000 | Travertine, limestone, or granite at $10 – $25 per sq ft |
| Labor (cutting, laying, compacting) | $2,500 – $5,500 | More for borders, curves, and patterns |
| Edge restraints (plastic, aluminum, or concrete) | $400 – $1,200 | Prevents pavers shifting over time |
| Polymeric sand joints | $200 – $600 | Locks pavers, resists weeds and ants |
| Sealing (optional, recommended) | $600 – $1,800 | Protects against San Antonio UV and oil stains |
Total installed cost for a typical 700 sq ft driveway: $7,000 – $18,000.
What pushes you to the top of that range? A long driveway, a circular drive, steep slopes requiring retaining walls, paver patterns like herringbone (about 10 – 15% more labor due to cuts), or choosing natural stone over concrete pavers. What keeps you low? A straightforward rectangular driveway with standard concrete pavers, good access for equipment, and an existing driveway that comes out cleanly.
What Affects Paver Driveway Installation Pricing in San Antonio
- Square footage. This is the biggest lever. A 400 sq ft single-car driveway in Universal City might run $6,000 – $9,000, while a 1,200 sq ft driveway plus turnaround in The Dominion could hit $18,000 – $25,000. More area means more pavers, more base, more labor.
- Paver material and brand. Concrete pavers from manufacturers like Belgard, Unilock, or Pavestone run $5 – $12 per sq ft for the material. Natural stone like travertine or Austin limestone runs $10 – $25 per sq ft. Clay brick falls in the middle at $8 – $15. The style you choose moves the total by thousands.
- Site prep and drainage. San Antonio’s black clay soil expands and contracts with moisture. That means the base layer under your pavers has to be deeper and better compacted here than in, say, Phoenix. If your lot has poor drainage, you may need French drains or regrading, which adds $1,500 – $4,000. We flag this during the free estimate, not after we’ve started digging.
- Existing driveway condition. Tearing out an old concrete driveway costs more than starting from bare dirt. Thick, reinforced concrete in an older neighborhood like Jefferson or Woodlawn Lake can add $1,000 – $2,500 in removal and hauling.
- Access to the site. If a dump truck and skid steer can’t get to the driveway area, crews haul material by hand or with smaller equipment. Tight lots in Alamo Heights or gated communities with truck restrictions add labor hours, which adds cost.
- Patterns and borders. A simple running-bond pattern is the most economical. Herringbone, basketweave, or a contrasting border color means more cuts and more waste, roughly 10 – 20% more in labor. Curved edges and circular inlays push that higher.
How to Save on Paver Driveway Installation
You can bring the price down without cutting corners that will cost you later. Here’s what works in San Antonio:
- Choose concrete pavers over natural stone. You’ll save $5 – $15 per sq ft on material alone. modern concrete pavers are manufactured to mimic stone closely, and they hold up better than soft limestone in San Antonio’s heat.
- Keep the design simple. Straight edges, a single color, and a running-bond pattern cut labor significantly. Save the herringbone and contrasting borders for the walkway instead of the full driveway.
- Replace during the same season you plan to seal. Some paver manufacturers offer better pricing in late fall and winter when demand drops. San Antonio’s mild winters mean installation can happen nearly year-round with no freeze-thaw delays.
- Ask about phasing. If you want the full driveway plus a paver patio, phasing the work over two years spreads the cost. Just know that base prep for the driveway should be done right the first time; don’t skimp there to save money.
- Get a written line-item quote. When you compare bids, make sure each one lists excavation, base, material, labor, and disposal separately. If a number looks too low, it’s usually because something’s missing. Sawyer Remodel San Antonio gives you every line item up front. Call (432) 547-6806 for a free estimate and we’ll walk you through the numbers.
Paver Driveway vs. Concrete vs. Asphalt in San Antonio
If you’re on the fence, here’s how the three compare locally. A concrete driveway in San Antonio typically runs $4,500 – $12,000 installed, and asphalt paving runs $3,500 – $9,000. Pavers cost more up front but last 25 – 40 years when installed correctly, versus 20 – 30 for concrete and 15 – 20 for asphalt in our climate.
Pavers also handle San Antonio’s clay soil better than a solid slab. Concrete cracks when the ground shifts; pavers flex at the joints. And if a section of your paver driveway does sink or stain, you replace individual pavers, not the whole surface. That said, if budget is the top concern and you’re okay with sealing every few years, a sealed concrete driveway is a solid choice. It comes down to how long you plan to stay in the home and what you want the driveway to look like from the curb.
Local Factors That Matter in San Antonio
We’ve installed paver driveways across San Antonio long enough to know this city has its own rules. The black clay soil west of Loop 410 and in areas like Culebra Park holds moisture and moves; without a properly compacted base of at least 4 – 6 inches of crushed limestone, pavers will shift within two or three years. That’s not a materials problem. It’s a prep problem.
San Antonio’s sun is another factor. UV breaks down unsealed paver color over time, especially darker tones. We recommend sealing within 30 – 60 days of installation and resealing every 3 – 5 years. In neighborhoods without HOA restrictions, like parts of Schertz or Selma, homeowners sometimes skip this step, but it’s the difference between a driveway that looks new at year five and one that looks faded.
Permitting is usually straightforward. Most paver driveway installations in San Antonio city limits require a right-of-way / driveway approach permit if the driveway connects to a public street, and some HOAs in developments like Fair Oaks Ranch or Cibolo Canyons require architectural review before work starts. We handle the paperwork as part of the project. If you’re in a neighborhood with specific paver restrictions, we’ll flag those during the estimate.
Paver Options We Install and What They Cost
You’ll pick from three main categories. Here’s what each one means for your wallet and your driveway’s lifespan.
Concrete Pavers ($8 – $18 per sq ft installed)
The workhorse. Brands like Belgard and Pavestone manufacture these in San Antonio-friendly colors that hold up to heat. You get a 25 – 35 year lifespan, no cracking, and easy spot repair. For a 700 sq ft driveway, expect $7,000 – $12,000 total. This is what we recommend for roughly 80% of homeowners in San Antonio.
Natural Stone Pavers ($15 – $30 per sq ft installed)
Travertine, limestone, and granite. Beautiful, but softer stones like Austin limestone can etch under sprinkler overspray and pool chemicals. Granite holds up best to San Antonio conditions but costs the most. A 700 sq ft natural stone driveway runs $10,000 – $18,000 or more. Worth it for a luxury home in The Dominion or Terrell Hills; overkill for a rental property near Lackland AFB.
Clay Brick Pavers ($12 – $22 per sq ft installed)
Less common for driveways but classic for San Antonio’s older neighborhoods like Monte Vista or King William, where historic character matters. Brick pavers are strong but more prone to fading without sealing. A 700 sq ft brick driveway runs $9,000 – $15,000.
What the Installation Process Looks Like
You should know what’s happening from day one to the final walkthrough. Here’s the sequence, the way Sawyer Remodel San Antonio runs it under The Relay Visibility Guarantee:
- Free site evaluation. We measure the driveway area, check soil conditions, map drainage, and discuss paver options. You get a written line-item quote before you decide anything.
- Excavation. We remove the existing driveway or strip sod and topsoil to a depth of 7 – 9 inches (more if we’re putting in a deeper base for clay soil).
- Base installation. Crushed limestone goes down in lifts, each compacted with a plate compactor. This is the step that prevents sinking and shifting.
- Sand bedding. About 1 inch of coarse sand is screeded level. Pavers sit on this layer, not directly on the base.
- Paver laying. Our crew lays the pavers in your chosen pattern, cutting edges with a wet saw. Edge restraints go in along the perimeter.
- Compacting and joint sand. A plate compactor vibrates the pavers into the sand bed, then polymeric sand fills the joints. Water activates it and locks everything in place.
- Sealing (optional). We apply a penetrating or film-forming sealer. It protects against oil, UV, and the occasional San Antonio monsoon downpour.
- Final walkthrough. You walk the finished driveway with the crew lead. If anything isn’t right, we fix it before we call the job done. That’s the 365-Day Done Right Promise: if it’s not done right, we make it right, backed in writing on every project.
Live arrival time, before-and-after photo updates, and a digital invoice you pay from a link. That’s The Relay Standard, and it’s how we’ve worked since 2005.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost per square foot in San Antonio?
Installed paver driveways in San Antonio run $10 – $26 per square foot all-in, depending on paver type and site conditions. Concrete pavers land at $10 – $18 per sq ft; natural stone runs $15 – $26 per sq ft. For an exact quote on your driveway, call (432) 547-6806 and we’ll measure it for free.
Is a paver driveway worth the extra cost over concrete?
For most San Antonio homes, yes. A paver driveway runs $7,000 – $18,000 versus $4,500 – $12,000 for concrete, but pavers last 25 – 40 years and won’t crack when the clay soil shifts. You also get spot repair instead of full replacement. If you plan to stay in the home 10 or more years, pavers usually win on total cost of ownership.
How long does paver driveway installation take in San Antonio?
A standard two-car driveway takes 3 – 7 days from excavation to final compaction. Larger projects with retaining walls or complex patterns can run 1 – 2 weeks. Weather is rarely a delay in San Antonio; rain can pause excavation, but we schedule around it. You’ll get a live arrival time every day, so you know exactly when the crew shows up.
Do I need a permit for a paver driveway in San Antonio?
If your driveway connects to a public street, you’ll typically need a driveway approach permit from the City of San Antonio. Cost runs $100 – $500 depending on the right-of-way work required. Some HOAs also require design approval. Sawyer Remodel San Antonio handles the permitting as part of your project.
Can you install a paver driveway over an existing concrete driveway?
We don’t recommend it. Laying pavers over cracked concrete in San Antonio’s shifting clay will transfer those cracks through the paver surface within a few years. The better approach is full removal of the old slab and a properly compacted base. It costs $1,500 – $4,000 more up front but extends the driveway’s life by decades.
What’s the cheapest paver option that still looks good in San Antonio?
Standard concrete pavers in a single color with a running-bond pattern start around $8 – $12 per square foot installed, putting a 500 sq ft driveway at $4,000 – $6,000. You can go lower with a smaller driveway or by skipping the sealer initially, though we recommend sealing within 60 days. For a free estimate with real numbers, call (432) 547-6806.
Ready for a Paver Driveway in San Antonio?
If you’re thinking about a paver driveway, the best next step is a free site evaluation. We’ll measure your driveway, check the soil, look at drainage, and hand you a written price that covers everything: excavation, base, pavers, labor, edges, and sealing. The number you approve is the number you pay. If anything goes wrong in the first year, the 365-Day Done Right Promise means we make it right, in writing.
You can reach a live person any time at (432) 547-6806 to schedule your free estimate. Calls are answered 24/7, and we’ll confirm your appointment with a live arrival time before the technician shows up. Background-checked, uniformed crews on every job. That’s how Sawyer Remodel San Antonio has done it since 2005.
Pricing reflects the San Antonio market as of 2026. Sawyer Remodel San Antonio offers free estimates – call (432) 547-6806.
Written by Luca Romano, Owner at Sawyer Remodel San Antonio, serving San Antonio since 2005.
What Our Customers Say
"Crew cleaned up each day. Swept and wiped down the work area every evening, which I did not expect."
- Joy B."Straight talk and simple communication. Every question got an answer by text within the hour."
- Cherie A."Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K.
