Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose CWS Construction
San Antonio Cws service means something specific to us: we repair, reface, and install CWS cabinetry and millwork every week, and we’re independent, not factory-bound. That independence lets us make honest repair-vs-replace calls on CWS Estate, Element, and Madison Series cabinets without a script pushing you toward a full kitchen gut. If you’ve got delaminating thermofoil, slamming soft-close drawers, or face-frame joints pulling apart, call (432) 547-6806 for a written price before any work starts.
San Antonio’s clay-heavy soils wreck foundations, but inside the house, our heat and humidity cycles do a number on cabinetry. CWS Element Series thermofoil is the one we see failing most often, especially around dishwashers and ranges. As an independent CWS service provider, we’re not affiliated with or authorized by CWS, and we’re upfront about that. What we offer is hands-on familiarity with how their products hold up in San Antonio homes, from CWS Construction in Alamo Heights, TX to Helotes to Terrell Hills.
Our crews have been working these kitchens for years. Luca Romano grew up in East Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending decades on real jobs across the Southwest. He and his crew have been working San Antonio for years, and Luca still does a final walkthrough on every job himself. The craft comes first. Everything else follows.
Why Trust Sawyer Remodel San Antonio for Your CWS Construction?
We work on CWS cabinetry and millwork weekly across San Antonio, and we’ve learned exactly where these cabinets fail under local conditions. Climate Guard finishes react to our 100°F-plus summers differently than they do in milder climates. Drawer-box joinery that stays tight in a coastal kitchen loosens up here when the central air cycles off and the house bakes. Hinge adjustability matters more when slab movement has a wall slightly out of plumb. That’s the kind of brand-specific knowledge you only get from touching hundreds of these cabinets in local homes.
Being independent means we can do what a factory-authorized service can’t. We can pair CWS cabinet boxes with higher-wear materials where they make sense, like Blum or Salice glides when an original CWS soft-close glide has failed and the drawer box is still solid. We can correct installation issues instead of working around them. And since every job operates under The Relay Visibility Guarantee, you get a live arrival time, photo updates before and after, and a written price before a single tool is picked up. Background-checked, uniformed technicians. Calls answered by a live person, 24/7. No voicemail loops.
Luca built his reputation on framing that’s square, tile that’s level, and timelines he actually keeps. That discipline extends to cabinet work. When he hands over a finished kitchen, the drawers glide, the doors hang straight, and the price you approved is the price you paid.
Styles & brands we work with
Common CWS Construction Problems We Fix in San Antonio
- Thermofoil delamination on Element Series drawer fronts and door edges. This is the big one in San Antonio. The heat and moisture cycling near dishwashers and ranges causes the vinyl wrap to bubble, crack, and peel away from the MDF core. Once moisture gets underneath, the adhesive fails and the thermofoil can’t be re-adhered reliably. We see it on drawer fronts first, then door edges. The fix is usually stripping the failed thermofoil and rebuilding with a more moisture-tolerant material.
- Soft-close drawer glide failures on Estate Series base cabinets. After 5 to 7 years of daily use, the plastic damper clips inside the original CWS glides wear out. Drawers start slamming shut or binding halfway. The drawer box is often still perfectly good, which means replacing the glide is the right call, not the whole drawer stack. We stock Blum tandem runners and Salice soft-close glides for this exact failure.
- Face-frame joints opening up on Madison Series upper cabinets. CWS joint adhesive has a hard ceiling, and San Antonio’s unconditioned garages and sunrooms blow right past it. Attic-level heat above 100°F breaks down the adhesive, and the face-frame stiles start separating from the rails. We’ve pulled Madison Series uppers out of garages where the joints had opened a full eighth of an inch. Regluing with a high-temp construction adhesive and re-clamping fixes it, but the cabinet needs to stay in a conditioned space afterward.
- Vinyl-wrapped toe kicks peeling after repeated mopping with alkaline cleaners. This one’s not really CWS’s fault, but it’s common. Alkaline floor cleaners eat at the adhesive holding the vinyl wrap to the MDF toe kick, and once an edge lifts, the wrap peels back. We replace toe kicks with solid wood or PVC alternatives that don’t care what you mop with.
- Hinge adjustment drift on full-overlay doors. CWS Estate Series full-overlay face frames rely on hinge clip tension to hold door alignment. On walls that have shifted slightly from San Antonio’s expansive clay soils, those clips drift over time, and doors start rubbing or hanging uneven. It’s often a 10-minute adjustment, not a door replacement. We check every hinge on every CWS service call as part of standard diagnosis.
CWS Parts & Our Repair-vs-Replace Approach
We start with OEM CWS hinges, glides, and touch-up kits where they’re still available and still the right part for the job. But we don’t have a religious commitment to factory parts. When a CWS soft-close glide has failed and the drawer box is intact, a Blum or Salice aftermarket glide is often a better long-term part than the OEM replacement. We stock both locally for fast turnaround in San Antonio.
The honest conversation happens with thermofoil delamination and swollen MDF. Repair is a short-term fix on a 10-plus-year-old cabinet. Once the MDF core has absorbed moisture, sanding and re-wrapping buys you a few years at best. Replacing with a more moisture-tolerant door material often costs less than repeated repairs, and we’ll tell you that plainly, with numbers in hand. That’s the point of a written price: you see the repair cost and the replacement cost side by side, then you decide. Call (432) 547-6806 for a free estimate and we’ll put the numbers in front of you.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We inspect every cabinet in the run, not just the one you flagged. CWS failure modes tend to cluster: one delaminating Element Series drawer front usually means its neighbors are close behind. We check glides, hinges, face-frame joints, and toe kicks, then photograph everything so you see exactly what we see.
- 2
Written price. Before any work starts, you get a line-item written price. The number on the invoice is the number you approved. No change orders, no surprise upcharges. For Cabinet Installation & Refacing on CWS cabinetry, expect $4,000 to ol3,000. A small or partial kitchen remodel involving CWS cabinets lands between $9,000 and $20,000. Drawer box replacement with soft-close glide upgrade runs $300 to $800 per drawer stack.
- 3
Repair, reface, or install. We do the work with the right parts: OEM where it’s the best call, Blum or Salice where it outperforms. For refacing jobs, we match shaker-style doors and catalyzed conversion varnish finishes to your existing CWS boxes so the kitchen looks like it was built that way.
- 4
Test. Every drawer opens and closes under load. Every door hangs square. Every hinge holds its position. We cycle things 50 times or more. If a glide binds or a hinge drifts, we fix it before we leave.
- 5
Warranty and walkthrough. Your work is covered by the 365-Day Done Right Promise in writing. If it’s not done right, we make it right. Luca does the final walkthrough himself, and you get before-and-after photos as part of The Relay Visibility Guarantee.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in San Antonio
We service the full CWS residential line we see in San Antonio kitchens: Estate Series raised-panel and full-overlay face-frame cabinets, Element Series thermofoil cabinetry, and Madison Series framed cabinetry with standard-depth wall and base units. We also handle CWS pantry and utility wall cabinets, including 10×10 and L-shaped kitchen layouts. Locally, we stock replacement glides, hinge clips, touch-up kits, and door bumpers for all three series, so most repairs start same-week, not next month.
Beyond repair, we install and reface CWS cabinets in kitchens, laundry rooms, pantries, and garages. We also design partial kitchen remodels around existing CWS boxes when the layout needs reconfiguring but the cabinet bodies are still sound.
We Also Service These Brands
While CWS is a big part of our San Antonio cabinet work, we’re also General Contractor services by trade. We install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, Kohler and Toto fixtures, GAF and CertainTeed roofing, and James Hardie siding. The point is, we’re not tied to one brand’s ecosystem. We recommend what works for your house and your budget, then put it in writing before we pick up a tool.
FAQs – CWS Construction Service in San Antonio
Yes, in most cases we can. The key is whether the cabinet boxes themselves are still square and the MDF hasn’t swollen from moisture. Refacing CWS Element Series means stripping the failing thermofoil from doors and drawer fronts, then rebuilding with new shaker-style doors and a catalyzed conversion varnish that resists steam and heat far better than thermofoil. You keep the original cabinet boxes and save thousands over a full replacement. Call (432) 547-6806 for a written refacing estimate.
It’s almost always a glide problem, not a hinge problem. Soft-close action on CWS drawers lives in the glides, usually in the plastic damper clips on Estate Series base cabinets. Hinges control door swing, not drawer close. If your drawers are slamming, the glides have worn out even though the drawer boxes are fine. We replace the failed CWS glides with Blum or Salice aftermarket units and you’re back to soft-close for years.
We can, but we won’t install Madison Series uppers in a space that hits 100°F-plus without modification. We re-glue the face-frame joints with a high-temp construction adhesive and recommend keeping the space conditioned if possible. For garages and sunrooms, we’d steer you toward plywood-box cabinetry over MDF-core CWS units, because MDF absorbs humidity and loses structural integrity faster in San Antonio’s uninsulated spaces.
For shallow scratches on stained wood, CWS touch-up kits work fine. A furniture marker and a wax stick hide the damage well enough. But for scratches that cut through to bare MDF on thermofoil doors, a touch-up kit is a bandage. The thermofoil will continue to peel from that breach point. Call us at (432) 547-6806 and we’ll tell you honestly whether a touch-up kit will do the job or you need a refacing.
Often, yes. We can reuse your existing CWS cabinet boxes and reorder the layout by moving base cabinets, adding or subtracting wall cabinets, and running new countertops to tie it together. We’ve done partial CWS kitchen remodels in San Antonio where the customer kept 70% of their cabinet boxes and we redesigned the run around them. The savings versus a full rip-and-replace typically land in the $9,000 to $20,000 range for small and partial remodels. Call (432) 547-6806 for an exact quote, estimates are free.
CWS cabinet installation and refacing in San Antonio runs $4,000 to $13,000, depending on cabinet count and door style. A small or partial kitchen remodel involving CWS cabinets is $9,000 to $20,000. Drawer box replacement with soft-close glide upgrades is $300 to $800 per drawer stack. Get a free written estimate at (432) 547-6806 and we’ll break down every line item before you commit.
Book Your CWS Service in San Antonio, TX
If your CWS cabinets are sagging, slamming, or peeling, we’ll diagnose the real problem and put a written price in your hands before any work starts. Call (432) 547-6806 to schedule your free estimate in San Antonio. Luca will be on the final walkthrough himself.
Written by Luca Romano, Owner at Sawyer Remodel San Antonio, serving San Antonio since 2005.
| Service | Price Range |
|---|---|
| Cabinet Installation & Refacing (CWS) | $4,000 – $13,000 |
| Small & Partial Kitchen Remodel involving CWS cabinets | $9,000 – $20,000 |
| CWS drawer box replacement with soft-close glide upgrade | $300 – $800 |
