Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose Mr-Glass Construction
We install and repair Mr-Glass shower enclosures and storefront systems across San Antonio Mr Glass service areas every week, handling everything from full frameless heavy glass installs to roller replacements on aging bypass doors. We’re an independent remodeling and glass installation company, not affiliated with Mr-Glass, which means our repair-versus-replace advice comes without brand bias. If it’s fixable, we’ll tell you. If it’s not, we’ll tell you that too, with a written price either way. Call (432) 547-6806 for a free estimate on any Mr-Glass work in San Antonio.
Mr-Glass earned its name in San Antonio’s remodels with clean frameless lines and commercial storefront systems that hold up to daily abuse. But here’s what the manufacturer’s generic page won’t tell you: in our hard-water, expansive-clay-soil climate, specific components fail in predictable ways. Silicone joints pull away from acrylic bases as slabs flex seasonally. Roller bearings grind down from mineral grit. Low-iron glass clouds when tap water dries on it repeatedly. We know these failure patterns because we fix them weekly, from Mr-Glass Construction in Alamo Heights, TX to Alamo Ranch. That local diagnostic depth is what makes this page different.
Why Trust Sawyer Remodel San Antonio for Your Mr-Glass Construction?
Our crews work on Mr-Glass Frameless Heavy Glass Series, Neo-Angle enclosures, Semi-Frameless Bypass Doors, and Commercial Storefront systems regularly enough that we can spot a hinge alignment problem or a failing seal from across the room. Luca Romano, our owner, grew up in East Los Angeles and trained at Los Angeles Trade-Technical College before spending decades on job sites across the Southwest. He still does the final walkthrough on every San Antonio job himself, checking glass alignment, seal integrity, and door swing before we call it done. The craft comes first. Everything else follows.
Because we’re independent, we’re not bound by a manufacturer’s replacement-first playbook. When a Mr-Glass panel is sound and the leak is a $40 silicone job, that’s what we recommend. When a pivot hinge has worn the glass notch into a stress-crack risk, we say so plainly and quote the replacement. Every repair carries our 365-Day Done Right Promise in writing. If it’s not done right, we make it right. That’s the standard Luca’s built the company on since 2005, and it applies to every Mr-Glass enclosure, storefront, and shower door we touch in San Antonio.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in San Antonio
- Silicone seal failure at curb and wall junctions. This is the number one Mr-Glass enclosure leak source in San Antonio. Hard water minerals accelerate silicone degradation, and expansive clay soil flexes slabs enough that rigid seals pull away from acrylic bases. We remove the old bead, clean the joint properly, and re-seal with a marine-grade silicone rated for humid, high-mineral environments.
- Roller bearing wear on Semi-Frameless Bypass Door Series. Homeowners use harsh cleaners with bleach or ammonia that strip the factory lubrication from roller bearings. The result is sticking, grinding, or a door that derails entirely. We replace the roller assemblies with aftermarket parts that match the original hardware footprint, no drilling or retrofitting required.
- Stress cracks at notch cuts in 3/8″ Frameless Heavy Glass panels. Over-tightened hinges concentrate stress at the notch cuts where the glass meets the hardware. Add San Antonio’s seasonal slab movement on expansive clay, and that stress finds the weakest point. We see hairline fractures radiating from hinge notches regularly. These panels must be replaced, never patched.
- Mineral scale buildup clouding low-iron panels. Mr-Glass low-iron glass, also called Starphire-style glass, looks stunning when clean but clouds permanently when hard tap water is allowed to dry on the surface repeatedly. The minerals etch into the glass at a microscopic level. We restore what’s restorable and give owners a hard-water care sheet to prevent recurrence.
- Neo-Angle pivot hinge deflection. On Mr-Glass Neo-Angle enclosures, the bottom pivot hinge takes the full weight of the door while the top hinge guides it. When the bottom bushing wears, the door sags, the latch side drags, and the silicone at the hinge side flexes until it fails. We replace the nylon pivot bushing, realign the door, and re-seal before the panel takes stress damage.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For Mr-Glass enclosures, there’s no magic in “OEM” tempered glass. Mr-Glass sources its panels from regional fabricators, and so do we. We order exact-size tempered glass from local San Antonio fabricators that meet ANSI Z97.1 safety standards. Local sourcing cuts lead time to days, not weeks, and the glass is identical in spec to what the enclosure shipped with. Where it matters, we’re careful to match hardware footprints. We reuse original hinges, clamps, and channels when they’re uncorroded. Rollers and seals get replaced with aftermarket equivalents that fit the existing mounting points exactly.
How we decide repair versus replace: if the glass is sound, the hardware is uncorroded, and the failure is a seal or roller issue, we repair. If there’s a stress crack, severe mineral etching, or hardware corrosion from years of hard-water exposure, we recommend replacement and show you why with photos. The decision is always yours, with a written quote for both options when it makes sense. Call (432) 547-6806 and we’ll walk you through what we found on your enclosure.
Our Mr-Glass Service Process – Step by Step
Here’s how every Mr-Glass service call works when you hire Sawyer Remodel San Antonio:
- 1
Diagnosis. We inspect the entire enclosure or storefront system, not just the symptom area. That means checking hinge tension, roller condition, seal integrity, glass stress points, and base flex. A leaking curb joint is often the result of a worn pivot hinge above it, and we find it before we quote.
- 2
Written quote. Before any work starts, you get a written price in hand. The number on that quote is the number on your invoice. No change orders, no surprises at the door. This applies to every Mr-Glass repair and install we do in San Antonio.
- 3
Repair or install. We execute the work with the right materials: marine-grade silicone for our hard-water environment, ANSI-certified tempered glass from local fabricators, and hardware that matches the original footprint. Technicians are background-checked and uniformed, so you know who’s walking into your home before they arrive.
- 4
Testing. We cycle the door repeatedly, check the sweep, run water over the seals where applicable, and confirm the glass sits square. If there’s a leak or a bind, we find it before we leave, not after you use the shower.
- 5
Warranty. Every job carries our 365-Day Done Right Promise in writing. If something we fixed fails within a year, we come back. Free second visit, no argument. That’s the Relay Standard, and it’s been our operating rule since 2005.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in San Antonio
We service the full range of Mr-Glass residential enclosures and commercial systems across San Antonio and nearby areas, including New Braunfels Mr Glass service. That includes the Frameless Heavy Glass Series in both 3/8″ and 1/2″ tempered glass, the Neo-Angle Shower Enclosure Series for corner installs, the Semi-Frameless Bypass Door Series for tub and shower combos, and the Commercial Storefront Series used in retail remodels around the city. We keep common roller assemblies, pivot bushings, and seal profiles in local stock for fast turnaround on repairs. For glass panels, our San Antonio fabricators cut and temper to exact spec, typically within days.
Beyond Mr-Glass, our crews bring the same care to every glass enclosure and bathroom project we handle. The clay soils, hard water, and summer heat in San Antonio don’t care what brand is on the box, and neither do we. We fix what’s broken and install what’s right, with a written price every time.
We Also Service These Brands
Mr-Glass is one of the brands we know deeply, but it’s not the only one. We also work regularly with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures on full bathroom remodels. If your Mr-Glass shower is getting a new vanity or tile surround at the same time, we can handle the whole job as your General Contractor. One crew, one written price, one 365-Day Done Right Promise covering the complete project.
FAQs – Mr-Glass Construction Service in San Antonio
Is Sawyer Remodel San Antonio authorized by Mr-Glass?
No, and we say that up front. We’re an independent remodeling and glass installation company serving San Antonio. We are not affiliated with or authorized by Mr-Glass. That independence is the point. We give you honest repair-versus-replace advice without brand pressure, and we stand behind our work with our own 365-Day Done Right Promise. Call (432) 547-6806 if you want straight answers on your enclosure.
Do you use genuine Mr-Glass or OEM parts?
For tempered glass panels, there’s no OEM distinction that matters. Mr-Glass sources panels from regional fabricators, and we do the same, using local San Antonio fabricators that meet ANSI Z97.1 safety standards. The glass spec is identical. For hardware like rollers, bushings, and seals, we use aftermarket parts that match the original mounting footprint exactly. We reuse original hinges, clamps, and channels whenever they’re uncorroded. Call (432) 547-6806 and we’ll tell you what your specific enclosure needs.
How long does Mr-Glass service take?
Most roller replacements, seal repairs, and pivot bushing swaps are completed in a single visit, typically two to four hours on site. Full glass panel replacements take longer because the panel must be cut and tempered to exact spec. With our local San Antonio fabricators, that’s usually three to five business days from measure to install. We give you the timeline in writing before work begins, and we hit it.
What Mr-Glass models and series do you cover?
We service the Frameless Heavy Glass Series in 3/8″ and 1/2″ glass, the Neo-Angle Shower Enclosure Series, the Semi-Frameless Bypass Door Series, and the Commercial Storefront Series. If you have a Mr-Glass product we’re less familiar with, we’ll tell you during the diagnosis. We’re not going to practice on your shower.
Will service void my Mr-Glass warranty?
That depends on the warranty terms and what’s being serviced. Some manufacturer warranties cover the glass and hardware for a specific period, and using third-party service does not automatically void them. However, if a repair is done incorrectly and causes damage, the manufacturer may decline a related claim. That’s why our repair work carries its own 365-Day Done Right Promise. We make it right, in writing, regardless of what the manufacturer decides. Call (432) 547-6806 and we’ll help you understand what your warranty covers before we touch anything.
How much does Mr-Glass construction cost in San Antonio?
For most Mr-Glass work in San Antonio, here are the price ranges we quote:
| Service | San Antonio Price Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel (including enclosure) | $9,000 – $28,000 |
Small repairs like roller replacements or seal work run well under a full replacement. A recent Alamo Heights job where we re-sealed a leaking neo-angle enclosure and replaced a worn pivot bushing totaled under $600. Call (432) 547-6806 for an exact quote on your specific enclosure. Estimates are free.
Can you replace just one panel of my Mr-Glass frameless enclosure, or do I need a full new set?
Yes, in most cases we can replace a single panel. The key is getting an exact match on glass thickness, edge profile, and hardware placement. We measure the existing panel, order a precise replacement from our local San Antonio fabricators, and install it using the original hardware where the hardware is sound. If the panel that failed was caused by a hinge or clamp issue, we’ll address that too, so the new panel doesn’t crack the same way. Call (432) 547-6806 for a free measurement and quote.
My Mr-Glass shower door is off-track and hard to slide. Is that a roller issue or something worse?
Usually it’s a roller bearing or track contamination issue. In San Antonio’s hard water, mineral grit accumulates on bypass door tracks and grinds the roller bearings down. The door sags, the top rollers lose contact, and the door derails. We clean the track, replace the roller assemblies, and realign the door. If the door has been derailing repeatedly, there may be a bent guide or worn track that needs attention too. We’ll diagnose it on site and give you a written quote before any work starts. Call (432) 547-6806.
Does San Antonio’s hard water permanently etch Mr-Glass panels, or can you restore them?
It depends on how long the mineral deposits have been sitting. Light to moderate buildup can be removed with the right cleaning compounds and tools. If scale has been allowed to etch the glass for years, the surface becomes permanently clouded and polishing won’t fully restore it. Low-iron panels show this more than standard clear glass. We’ll assess your panels honestly and tell you whether restoration is realistic or replacement is smarter. For a free assessment, call (432) 547-6806.
Can you convert my old Mr-Glass framed shower into a modern frameless look without changing the base?
Often, yes. If the existing base and wall waterproofing are sound, we can remove the framed enclosure and install a frameless Mr-Glass-style enclosure using the same footprint. The key checks are base condition, wall squareness, and whether the existing waterproofing will support a frameless install. San Antonio’s expansive clay soils sometimes cause enough slab movement to make a frameless install trickier on older homes. We’ll evaluate it on site and tell you what’s possible before quoting. Call (432) 547-6806.
Is it worth repairing a Mr-Glass enclosure that’s 15+ years old, or should I just replace it?
At 15 years, the deciding factors are glass condition, hardware corrosion, and whether the base is still solid. If the glass is clear, the hardware is mostly uncorroded, and the failure is a seal or roller, a repair makes sense financially. If there’s mineral etching, corroded hinges, or the base is flexing from slab movement, replacement is usually the better long-term call. We’ll look at the whole system and give you both options with written pricing. Call (432) 547-6806 for an honest assessment.
Book Your Mr-Glass Service in San Antonio, TX
You know what’s wrong with your Mr-Glass enclosure. You just need someone who’ll fix it right and stand behind it. Call (432) 547-6806 to schedule your free estimate. We’ll come out, diagnose the issue, and put a written price in your hands. 365-Day Done Right Promise on every job.
Written by Luca Romano, Owner at Sawyer Remodel San Antonio, serving San Antonio since 2005.
