Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The San Antonio Owner’s Guide
A full Kohler kitchen remodel in San Antonio typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and how much of your existing plumbing and electrical we’re moving. If you’ve got a Kohler sink, faucet, or fixture that’s failed and you’re wondering whether to patch it or rebuild the kitchen around it, here’s the short version: we stock and install Kohler-compatible parts across San Antonio, and we can usually get eyes on your kitchen within a day or two of your call.
What most San Antonio homeowners actually discover isn’t a single dead part. It’s the slow accumulation – a faucet that dribbles at the base, a sink rim that’s pulling away from the counter, cabinet faces that don’t close square anymore. You came looking for a Kohler part and realized the whole kitchen has been quietly wearing out around it. We see that in Alamo Heights, Stone Oak, and pretty much every neighborhood between. You don’t have to rebuild everything to fix one fixture, but you should know the real cost either way.
We’re an independent San Antonio remodeling contractor, not a Kohler dealer or affiliate. What that means for you: we recommend Kohler because the parts hold up and are easy to get, but we install what fits your kitchen and your budget, and we’ll tell you when a Kohler original is worth the money and when a quality aftermarket equivalent does the same job for less.
Which Kohler Models This Applies To
Kohler’s kitchen lineup spans several series, and the parts are not all interchangeable. The big ones we work with regularly in San Antonio kitchens:
- Kohler Prolific and Sous faucets – the pull-down and touchless models. The solenoid and sensor cartridges differ between generations, so a 2019 Prolific part won’t always fit a 2023 model even though the faucet looks identical.
- Kohler Whitehaven and Riverby sinks – enameled cast iron and stainless. The undermount clips and strainer assemblies are model-specific. Trust us on this one: the universal strainer from the hardware store leaks on a Whitehaven, every time.
- Kohler Karbon and Crue bar faucets – high-arc articulating models. The joint O-rings are the first thing to fail, and Kohler sells rebuild kits for most of them.
- Kohler Iron/Tones and Whitehaven sink grids – the rubber feet dry-rot in Texas heat faster than the warranty suggests.
How to identify your exact part before calling us: look under the sink or behind the faucet base for a small sticker or engraved number starting with “K-“. That’s the model prefix. If the sticker is gone, measure the sink bowl width and check the number of faucet holes in your counter, then call us at (432) 547-6806 and we’ll match it from there. One more thing: Kohler’s OEM warranty covers most defects for the lifetime of the original owner, so if you bought the house with the fixture, you’re likely outside coverage. That’s when the aftermarket conversation matters.
Styles & brands we work with
Signs Your Kohler Kitchen Is Failing
- Faucet dribbles at the swivel base after it’s shut off. The O-ring and diverter cartridge have worn out. In San Antonio’s hard water, mineral buildup accelerates this by a few years.
- Sink flexes or separated from the counter edge. The undermount adhesive or clips failed, often because the original install used the wrong clip count for the sink weight.
- Touchless faucet cycles on and off or won’t shut off at all. The solenoid’s seals are shot. This is a $25-$75 part, not a reason to replace a $600 faucet.
- Water pools around the faucet base on the counter. The deck gasket compressed or the silicone bead failed. In San Antonio humidity, once the seal starts to go, it goes fast.
- Cabinet doors bind against the frame or won’t close square. This is usually humidity movement or hinge wear, but if you have settled slab foundations (common south of Loop 410), it’s often the cabinet box itself racking out of square.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re just swapping a failed Kohler fixture or part, expect $150 to $600 installed for most faucet or sink repairs in San Antonio, depending on the part and whether we’re also correcting the original install mistake. If you’re doing the full kitchen remodel and want Kohler fixtures throughout, the whole kitchen runs $14,000 to $45,000 in this market.
Here’s the line-item breakdown for San Antonio kitchens:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation (Cambria, Silestone, or Caesarstone): $2,000 – $6,500
- Kohler faucet or sink fixture work: $150 – $600 installed
Every job gets a written price before any tool is picked up. That’s The Relay Standard, and it means the number you approve is the number on the invoice. No change orders, no “we found something behind the wall” upcharge. We’ve been doing it this way since 2005, and Luca Romano still walks every finished kitchen himself before we hand it over.
DIY or Call Us?
For a dripping cartridge or a worn O-ring on a Kohler faucet, a careful owner can usually handle the swap if they’ve got the right Kohler rebuild kit and the patience to read the diagram twice. Plumbing is not high-voltage work, and most faucet cartridges are a 20-minute job for a motivated person.
Here’s where DIY goes wrong in San Antonio, and it’s not about competence. It’s about the second and third problems nobody budgets for. Hard water mineral crust hides behind the escutcheon, a supply line twists off at the shutoff valve, the cabinet back was never cut properly for access. Calling us at (432) 547-6806 means we show up with the Kohler part, the aftermarket equivalent if it makes more sense, the basin wrench, and the knowledge to not turn a $50 repair into a $500 emergency. Free estimates, and we answer the phone 24/7 with a live person.
FAQs
A Kohler faucet cartridge typically lasts 6 to 10 years in San Antonio before the seals wear out, and hard water shortens that by a couple years. The sink itself, if it’s cast iron or quality stainless from the Whitehaven or Riverby lines, lasts decades. The parts that fail first are the rubber O-rings, the diverter, and the solenoid on touchless models. Call (432) 547-6806 and we’ll tell you if a $30 kit saves you a $500 fixture.
Yes, most Kohler faucets and sinks are repairable rather than replaceable. A bad cartridge, worn O-ring, or failed solenoid costs $25 to $150 in parts and a couple hours of labor. We’ll tell you honestly when a replacement makes more sense than a repair. That’s the whole job.
A fixture repair is same-day. A full kitchen remodel runs 4 to 8 weeks in San Antonio, depending on whether you’re moving plumbing or electrical, and how long your countertop fabricator takes. We give you a written timeline with the written price, and photo updates before and after each phase.
We stock the most common Kohler cartridges, O-ring kits, solenoids, and drain assemblies for the Prolific, Sous, Karbon, and Crue lines on the truck. For less common parts, we order OEM through our supplier and typically have it in hand within 2 to 3 business days in San Antonio. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and install with the same accountability across the whole remodel.
The craft comes first. Everything else follows.
Written by Luca Romano, Owner, Sawyer Remodel San Antonio at Sawyer Remodel San Antonio, serving San Antonio and nearby areas.
