A Sawyer company - serving San Antonio, TX
An open living room and dining area after a whole-home remodel

Therma-Tru Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Antonio
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Therma-Tru Fence Installation: The San Antonio Owner’s Guide

Therma-Tru fence installation in San Antonio typically runs $3,500 to $9,000 fully installed, depending on the panel style, linear footage, and post condition. We stock Therma-Tru-compatible gates, panels, and hardware on our trucks and can match most models same week. Most owners call us because a gate post has gone soft at the base, a panel has warped in the Texas sun, or the latch no longer catches after a season of San Antonio clay shifting under the footings.

General contractor and client reviewing blueprints inside a home renovation project nationwide

Call (432) 547-6806

If you’re reading this, you probably already know the part that failed. What you need now is a straight answer on the price and whether the fix will last. That’s what this page covers.

Which Therma-Tru Models This Applies To

A remodeled staircase with wood treads and a slim metal railing

Therma-Tru makes entry doors, but the fence and gate line is what San Antonio homeowners call us about. The compatibility question comes down to the hinge system and post spacing, not just the panel brand. Most Therma-Tru-compatible fence installations we do break into two groups: pre-hung gate panels that mount to 4×4 or 6×6 posts, and full-run panel systems where the gate and adjoining fence sections share the same rail profile.

The gotcha we see regularly: a homeowner buys a replacement gate panel online, then finds the hinge spacing on their existing post doesn’t line up. Therma-Tru gate frames use a mortise-style hinge pocket that sits 7 inches from the top and bottom rail, not the 6-inch standard you’ll find on a box-store gate. We carry both patterns and we’ll check your post before we quote anything. The OEM-versus-aftermarket decision is simple for us: for gate frames and latch hardware, we install OEM-spec because the tolerances matter. For fence panels themselves, a quality pressure-treated equivalent does the job at roughly 20% lower cost, and we’ll tell you which route makes sense before we order anything.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Therma-Tru Fence Installation Is Failing

  • Gate drags or won’t latch. This is the number one call. In San Antonio, clay soil expands and contracts with our wet-dry seasons, and that movement torques the post. The gate frame is usually fine, but the post has drifted out of plumb. If the latch throws but doesn’t engage, the post has crept a quarter inch or more.
  • Soft spot at the bottom of the gate post. Water pools where the post meets the concrete footing, and after five or six Texas summers, rot starts. Push a screwdriver into the base. If it sinks in, that post is done.
  • Panel rail separating from the stile. Therma-Tru panels are built tight, but sun exposure on the west side of a San Antonio yard will dry the wood enough that the rail-to-stile joint starts to gap. This is repairable early on. Left alone, the panel sags and pulls the whole run out of line.
  • Rusted hinge screws or a sagging gate corner. If the top hinge screws are rusting, you have moisture working through the frame. The gate will start sagging toward the latch side within a season. Tightening won’t fix it, because the wood around the screw threads is already gone.
  • Fence section leaning in a straight-line run. One failing post drags the sections attached to it. You’ll see a visible wave in the top rail line from the street. By the time you see the wave, at least one post below grade is compromised.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished basement family room with a media wall and wet bar

In San Antonio, a full Therma-Tru-compatible fence installation or gate replacement runs $3,500 to $9,000. The spread comes down to three things: total linear feet, whether we’re replacing posts or working with existing ones, and whether the soil condition requires deeper footings. A single gate replacement with new hardware and a new post usually lands between $700 and $1,600. A full backyard run of 150 linear feet with multiple gates sits at the top of the range.

Every quote includes parts, labor, haul-away of the old material, and our workmanship warranty. The written price you approve is the price on the invoice, no change orders, no last-minute surprises. Luca Romano still walks the final lines himself before we pack up, checking that every gate swings true and every panel sits flush.

DIY or Call Us?

You can check the post bases yourself, confirm the hinge spacing, and measure your run. That’s useful. What we’d tell you to skip is resetting a gate post in San Antonio clay without a concrete footing that goes below the root line. A shallow set posts will lean again by next spring, and you’ll have spent a weekend and a few hundred dollars on a fix that doesn’t hold. Gate work also involves a panel under tension once the hinges load, which can pinch fingers or swing hard if the latch releases mid-job. We’d rather you call us. Luca built his reputation on the principle that the craft comes first, everything else follows, and a gate that doesn’t sag after two years is craftsmanship you can see. If you want to price it first, call (432) 547-6806 and we’ll give you a real number over the phone.

FAQs

A remodeled living room with built-in shelves around the fireplace

Getting started with Sawyer in San Antonio

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your San Antonio team

A local crew that works across San Antonio and the towns around it, to the same written standard as every Sawyer location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Antonio? Licensed & insured · Written quotes before work starts response · free estimates
Call (432) 547-6806
Local Service Coverage

Request a Free Estimate in San Antonio

Tell us what you need - Sawyer Remodel San Antonio responds fast. No obligation.

By submitting this form, you confirm you have read our Privacy Policy and agree to be contacted through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch