







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The San Antonio Owner’s Guide
We stock, order, and install ActiveYards-compatible windows and doors across San Antonio, with most replacements running $4,500 to $15,000 installed depending on the size, series, and how many units you’re swapping. Most owners call us the same day they notice a fogged double pane, a door that won’t latch, or a frame that’s started pulling away from the wall. The usual discovery goes like this: a window that used to open with one hand now needs both, or you spot condensation between the glass that never dries out. That’s a seal failure, and on ActiveYards units it means the insulated glass unit (IGU) is done. The good news is you’re not replacing the whole window for a failed seal. A lot of what looks like a full replacement is actually a part-level fix, and that’s where we come in.

Key Takeaways:
- ActiveYards windows and doors are modular, so most failures are repairable at the part level without a full frame replacement.
- Installed replacement costs in San Antonio run $4,500 to $15,000 for full units; component repairs like IGUs and hardware run far less.
- San Antonio heat and humidity are the biggest killers of seals and weatherstripping, not the hardware itself.
- We’re an independent service provider, not affiliated with ActiveYards, and we carry OEM and factory-equivalent parts.
Which ActiveYards Models This Applies To

ActiveYards markets its product lines under a few different series names depending on when the home was built and which dealer handled the original install. What we see most in San Antonio subdivisions built after 2005 are aluminum-frame sliding windows, single-hung vinyl units, and patio doors in the 60-inch and 72-inch widths. The identification sticker is usually on the head jamb or the edge of the sash, but half the time it’s faded, painted over, or missing entirely. When that’s the case, we measure the visible glass (not the frame), check the balance type, and match the part from there.
The other gotcha with ActiveYards is the glass thickness spec. Most of their insulated units use 7/8-inch overall thickness, but some of the earlier runs came in at 3/4-inch. It’s a small difference that causes big problems if you order the wrong IGU, because the glazing bead won’t seat. We measure the thickness with a caliper on every call before ordering anything, and we’ve caught enough mismatches that it’s standard practice now, not a maybe. On parts, OEM is always the cleanest match for hinges and locks, but the glass units we typically source from a San Antonio fabricator who builds to the exact ActiveYards spec at a better price than dealer-supplied. You get the same Low-E coating package and argon fill without the dealer markup.
Styles & brands we work with







Signs Your ActiveYards Windows & Doors Is Failing
- Condensation between the panes that won’t wipe off. This is a failed seal, full stop. In San Antonio’s summer humidity swings, a sealed unit that’s lost its argon will fog and stay fogged. The fix is a new IGU, not a new window frame.
- Sash won’t stay up, or takes a shove to move. ActiveYards single-hungs use a balance system that loses tension over time. The channel balances are replaceable, and it’s usually a 45-minute in-home repair with the right part on hand.
- Lock won’t engage or the latch misses the strike plate. Aluminum frames settle, especially on south-facing walls that take the heat. The door or window shifts a few millimeters and suddenly the lock is cosmetic. We shim, adjust, or replace the hardware so it actually secures.
- Visible daylight or a draft around the frame. This is a weatherstripping or glazing bead failure. In Texas, UV turns the vinyl pile on sliding windows brittle in about seven to nine years. Once it’s dust, the opening leaks air around the clock.
- Rollers grinding on the patio door. ActiveYards patio doors use steel rollers that do not like San Antonio’s dust. They seize, they grind, and then the door takes a shoulder to move. Most customers wait until the track itself is carved up, which turns a $40 roller replacement into a $400 track repair. Don’t wait on that one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For full ActiveYards window replacement, expect $4,500 to $15,000 in San Antonio depending on the number of units, accessibility, and frame condition. A single IGU replacement, which solves fogged glass, runs in the hundreds, not thousands, and a patio door roller or hardware refresh is typically under $500 including the service call. What drives the top end is full-frame tear-out with stucco or masonry patching around the opening, and that’s the difference between a retrofit insert and replacing the entire window unit. We’ll tell you which one your house actually needs, because if the frame is square and the flashing is intact, you don’t need to pay for a full tear-out.
Every job includes the part or unit, labor, haul-off of the old material, and a written line-item price before we schedule a single day of work. The number you approve is the number you pay. We also back the install with our 365-Day Done Right Promise: if it’s not right, we make it right, in writing, for a full year. That applies whether we’re swapping a glass unit or replacing every window on the south wall.
DIY or Call Us?
Here’s the honest split. You can safely clean tracks, check for loose screws on the strike plate, and note whether the condensation is inside the panes (seal failure) or on the surface (humidity issue in the house). That’s useful information that helps us quote faster over the phone. What goes wrong with DIY is when people try to pull the glazing bead on an IGU to fix a fogged pane. On ActiveYards units, once the bead comes off, the glass is under pressure from the frame’s supporting clips, and without the right tool you’ll chip the corner of the pane or ruin the bead. Then you’re buying both a new IGU and new bead, which costs more than the repair would have in the first place. Doors that won’t latch are easier than they look to fix poorly, and a cut strike plate on a metal frame means welding or a new door. Call (432) 547-6806 and we’ll give you a straight answer on whether it’s a part we can match or a job for a full replacement. The estimate is free either way.
FAQs

Expect 15 to 20 years of useful life from the frames, 8 to 12 years from the seals and weatherstripping in central Texas heat. Hardware like rollers and balances typically needs attention around year eight or nine. The frames will outlast everything else on the unit, which is why part-level repair makes more sense than full replacement during the first decade.
Yes, and that’s usually the right call. Failed IGUs, worn balances, dead rollers, and broken locks are all part-level repairs we handle without touching the frame. Full replacement only makes sense when the frame is warped, water-damaged, or the aluminum is pitted to the point of leaking. Call (432) 547-6806 and we’ll tell you which category your unit falls into.
Most single-unit repairs, like an IGU or balance replacement, are done in under two hours once the part is ordered and in hand. Full multi-window replacements run one to three days depending on the scope. We order the part first, confirm it’s physically in San Antonio, and then schedule the work so there’s no day with the window sitting open.
We don’t stock every ActiveYards part on the shelf, because the series spec varies too much from one San Antonio build to the next. But we have fast turnaround from our local suppliers for the common items: IGUs, rollers, balances, and lock sets. Lucas Romano and the crew also keep the most-requested hardware on the truck from our work with KraftMaid, Cambria, and Silestone projects, so a surprising number of hardware fixes happen on the first visit. Call (432) 547-6806 and we’ll confirm the part and the lead time on the first call.
Written by Luca Romano, Owner, Sawyer Remodel San Antonio at Sawyer Remodel San Antonio, serving San Antonio and nearby areas.


