Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Bathroom Vanity Installation Cost in San Antonio?
Bathroom vanity installation in San Antonio typically runs $800 to $3,000 for a standard single or double vanity, including labor, basic plumbing hookup, and haul-away of the old unit. Most homeowners in neighborhoods like Alamo Heights, Stone Oak, and Helotes land between $1,200 and $2,200 for a mid-range vanity with a stone or quartz top. The final number depends on whether you’re swapping in a stock vanity or custom-building around a Kohler or KraftMaid cabinet.
That range covers the full scope of what we handle at Sawyer Remodel San Antonio: removing the old vanity, checking the wall and floor underneath, setting the new cabinet, hooking up the supply lines and p-trap, caulking and sealing, and hauling everything away. Here’s the honest breakdown of where every dollar goes, what drives the price up or down, and what you should know before you shop.
Bathroom Vanity Installation Cost Breakdown (2026)
Here’s what a bathroom vanity installation actually costs in the San Antonio market right now, line by line. These are the numbers we quote from every day, and they hold across most of Bexar County, whether you’re in Alamo Ranch, Terrell Hills, or out toward Boerne.
- Stock vanity (24″ to 48″): $300 – $900 for the cabinet, sink, and top from a big-box or supply store
- Mid-range vanity with quartz or granite top: $900 – $2,000 for a 36″ to 60″ unit, often from Cambria or Caesarstone fabricators
- Custom or semi-custom vanity: $1,800 – $4,500+ for KraftMaid, Wellborn, or full custom builds with soft-close drawers and dovetail joinery
- Labor for a standard swap-out: $400 – $800 for removal, setting, plumbing, and haul-away
- Labor with plumbing relocation or wall repairs: $800 – $1,800 if supply lines, drain lines, or drywall need to move
- Faucet and drain assembly: $80 – $400 depending on brand; a Moen or Grohe faucet adds more than a stock chrome set
- Haul-away and disposal: $50 – $150 for the old vanity and sink
So a straight swap with a stock vanity and no surprises lands around $800 to $1,300 all in. A double vanity with a Cambria quartz top, new Moen faucets, and some plumbing tweaks runs $2,000 to $3,000. The minute you start moving plumbing, opening walls, or rebuilding the cabinet footprint, you’re past $3,000, and that’s where a full bathroom vanity installation in San Antonio becomes more of a remodel than a swap.
One thing most contractors won’t tell you upfront: the vanity unit itself is only about 40 to 60 percent of the total invoice. The rest is labor, materials, and the things you discover when the old cabinet comes off the wall. We put the price in writing before the first tool leaves the truck, so those discoveries don’t turn into surprise line items.
What Affects Bathroom Vanity Installation Pricing in San Antonio
Every vanity job has its own variables, and here are the six that move the needle most in our $800 to $3,000 range.
- Plumbing condition and location. If your supply lines and drain are in good shape and in standard positions, it’s a clean swap. If they’re 30 years old, corroded, or in the wrong spot for the new vanity, that’s extra labor. We see this constantly in older neighborhoods like Monte Vista and Mahncke Park, where original plumbing from the 1950s and 60s hasn’t been touched.
- Vanity size and type. A 30-inch stock vanity goes in fast. A 72-inch double vanity needs two people to set, more precise leveling, and often more plumbing work. It also costs more to build or buy in the first place.
- Countertop material. Cultured marble is the cheapest and most forgiving. Granite and quartz from Cambria or Caesarstone run more. A bathroom vanity top is small enough that the material upgrade may only add $200 to $600, but it changes the look completely.
- Wall and floor condition behind the old vanity. Water damage from a slow leak is the number one thing we find after pulling an old vanity. If the drywall behind it is soft or the subfloor is spongy, that has to be repaired before the new cabinet goes in. In San Antonio’s humidity, small leaks turn into bigger problems fast.
- Custom vs. stock cabinetry. A stock vanity from a supplier is order today, install next week. KraftMaid or Wellborn semi-custom takes four to eight weeks to arrive but gives you exact sizing and finish control. You pay for that lead time and precision.
- Faucet and fixture choices. The vanity is the cabinet. The faucet is separate, and it ranges from $40 to $600. We install Kohler, Moen, and Grohe fixtures regularly, and the difference in build quality is real, not just markup.
Those are the honest variables. No contractor can give you a real number without seeing the bathroom, which is exactly why our home page exists as the starting point for the free estimate process, and why the estimate itself is always free, always in writing, and always honored.
Is It Cheaper to Repair or Replace a Bathroom Vanity?
If your vanity has a cracked top, a sagging cabinet floor, a drawer that won’t close, or a door that’s come off its hinges, you’re usually better off replacing it than sinking money into repairs. Let’s put numbers on it.
A replacement vanity top by itself runs $150 to $500 for cultured marble, plus $150 to $350 for installation. A full vanity replacement with a stock cabinet starts at $800 to $1,300 installed. If your cabinet is in good shape but the top is shot, replacing just the top saves money. If the cabinet itself is water-damaged, swollen, or falling apart, repairs won’t last, and you’ll spend $300 to $700 trying to patch something that should just come out.
We’ve pulled vanities in San Antonio where the cabinet back was held together by paint and hope. Replacing it with a new unit, properly sealed and leveled, costs a little more than the repair, but it’s the only option that doesn’t come back to bite you in six months. The 365-Day Done Right Promise means that if the new install isn’t done right, we make it right, no argument.
How Long Does Bathroom Vanity Installation Take?
A standard vanity swap takes half a day to a full day. Removal of the old unit is an hour or two. Setting and leveling the new cabinet is another hour. Plumbing hookup, faucet install, caulking, and cleanup take the rest of the time. If there’s water damage to repair or plumbing to relocate, allow a second day.
What takes longer is the shopping and ordering. Stock vanities are available same week. Semi-custom KraftMaid or Wellborn orders take four to eight weeks. Quartz tops from Cambria or Caesarstone fabricators typically run one to two weeks after templating. The install itself is the short part.
The Relay Visibility Guarantee applies to every job we book: a live arrival time, photo updates before and after, and a written price before work starts. You’ll know who’s coming, when they’ll be there, and what it costs, all confirmed before the first cut is made.
Bathroom Vanity Installation Cost: San Antonio vs. Texas vs. National
San Antonio runs slightly below the national average on vanity installation. Nationally, the range is roughly $900 to $3,500. In San Antonio, it’s $800 to $3,000. Why the difference? Competitive labor market, lower overhead than coastal cities, and a strong supply of local suppliers and fabricators. Dallas and Austin trend $100 to $300 higher than us on the same job.
Inside San Antonio, there’s variation too. Newer developments in the northeast side like Cibolo and Schertz have newer plumbing and standard cabinet footprints, which usually keeps installs in the $800 to $1,800 range. Southtown and King William, with older homes and more custom footprints, tend toward $1,200 to $2,800. Alamo Heights and Terrell Hills, where custom cabinetry and higher-end finishes are standard, often run $1,500 to $3,500. Those sub-ranges are real patterns we see, not just zip code guesswork.
How to Save on Bathroom Vanity Installation
You don’t have to max out the budget to get a vanity that looks right and works right. Here’s how to keep the number low without cutting corners that’ll cost you later.
- Buy the vanity before you book the installer. When you bring your own stock vanity, you avoid the markup some contractors add for procurement. You also control the timing.
- Choose a stock size that matches your plumbing. A 36-inch vanity where a 36-inch cabinet already sits is a clean swap. Change the width and the plumbing has to move, and that’s extra labor.
- Keep the faucet and drain assembly simple. A quality chrome fixture from Moen or Kohler runs $100 to $200 and works just as well as a $500 brushed gold piece. The p-trap and supply lines don’t care what finish your faucet is.
- Handle demolition yourself, but only the safe parts. You can empty the vanity, remove the drawers and doors, and shut off the water. Leave the plumbing disconnect and the heavy lifting to a professional, especially if you have an older home with rigid copper supply lines.
- Skip the custom top for a secondary bathroom. A guest bath gets a cultured marble top for $100 to $300. Save the Cambria quartz for the primary bath, where you’ll actually enjoy it.
- Get the estimate in writing and hold the contractor to it. A written price before work starts is the simplest money-saver there is. No upsells at the door, no changing number mid-job. That’s the Sawyer Remodel San Antonio standard on every single project.
Call us at (432) 547-6806 for a free estimate. We’ll give you a real number for your specific bathroom, not a range you have to guess at.
FAQs – Bathroom Vanity Installation Cost
How much does it cost to install a bathroom vanity in San Antonio?
A bathroom vanity installation in San Antonio costs $800 to $3,000, with most jobs landing between $1,200 and $2,200. The vanity itself accounts for roughly 40 to 60 percent of the price, with labor, plumbing, and haul-away making up the rest. Call (432) 547-6806 for a written estimate on your specific bathroom, free of charge.
How much does it cost to replace a bathroom vanity top?
Replacing just the vanity top in San Antonio runs $300 to $850 including materials and installation. A stock cultured marble top costs $150 to $400, while a quartz or granite top from Cambria or Caesarstone runs $500 to $1,200 by itself. Installation adds $150 to $350 depending on whether the old top comes off cleanly. Call (432) 547-6806 for an exact quote.
Is it cheaper to repair or replace a bathroom vanity?
Replacing is cheaper in the long run, at $800 to $3,000 installed versus $300 to $700 in patch repairs that rarely last on water-damaged cabinets. If the cabinet structure is solid and only the top is damaged, a top-only replacement at $300 to $850 is the cheaper route. If the cabinet itself is swelling or sagging, replacement is the only option that makes sense.
Can you install a bathroom vanity same day?
Yes, in most cases. A standard vanity swap with a stock unit and accessible plumbing is a same-day install when the vanity is already on site. Custom or semi-custom vanities from KraftMaid or Wellborn take four to eight weeks to arrive, and the install happens within a day or two of delivery. Call (432) 547-6806 to confirm availability.
How much does a double vanity installation cost?
A double vanity installation in San Antonio runs $1,500 to $3,000, depending on the width, whether the plumbing needs to be reconfigured for two basins, and the countertop material. The vanity itself typically costs $900 to $2,500 for a quartz-topped unit, and labor for the two-basin plumbing runs higher than a single. Call (432) 547-6806 for a free, written estimate.
Does Sawyer Remodel San Antonio offer free estimates for vanity installation?
Yes. Every estimate from Sawyer Remodel San Antonio is free and in writing. You’ll get a live arrival time, a fixed price before work starts, and photo updates before and after the job. That’s the Relay Visibility Guarantee, and it applies to every project we take on, from a single vanity swap to a full bathroom vanity installation in San Antonio.
Pricing reflects the San Antonio market as of 2026. Sawyer Remodel San Antonio offers free estimates – call (432) 547-6806.
Written by Luca Romano, Owner at Sawyer Remodel San Antonio, serving the San Antonio metro since 2005.
What Our Customers Say
"Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K."Quote was itemized and every change was approved in the app."
- Sasha L."Bathroom remodel. Tile and shower niche are flawless. Updates by text kept me in the loop."
- Hugh P.
