Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose Jerith Construction
We’re Sawyer Remodel San Antonio, and we service Jerith aluminum and steel fence systems across the city as an independent provider – not a manufacturer-authorized dealer. Our crews have rebuilt and repaired Jerith residential, industrial, and pool fencing throughout San Antonio for years, and what separates our work is knowing how these fences actually fail here: expansive clay soil heaves posts, summer UV breaks down powder coat, and high winds find every weak point. If you need a San Antonio Jerith service, we diagnose the real problem before touching a picket. That means we diagnose the real problem before touching a picket, use genuine Jerith parts when they’re still made, and give you a written price before any work starts. Call (432) 547-6806 for a free estimate.
If you own a Jerith fence in San Antonio, you already know it’s a solid product. What you may not know is that most early failures aren’t the fence’s fault – they’re installation issues compounded by this city’s soil. Our crew lead, Luca Romano, studied the trade at Los Angeles Trade-Technical College and has spent decades on jobs across the Southwest. He still walks every finished job himself. The craft comes first. Everything else follows.
Why Trust Sawyer Remodel San Antonio for Your Jerith Construction?
Jerith fences get installed by lots of contractors, but very few understand what happens to them five, ten, or fifteen years down the road in San Antonio. Our technicians have worked on enough Jerith pool fences, residential aluminum runs, and industrial steel systems to know the difference between a hinge that’s worn out and a post that’s been pushed out of plumb by clay expansion. That’s what you’re paying for: someone who fixes the cause, not the symptom.
We use genuine Jerith pickets, rails, and gate kits whenever the manufacturer still produces them. When a specific extrusion has been discontinued – and Jerith has phased out several older line profiles – we source dimensionally matched 6005-T5 aluminum from the same mill spec. That keeps the fence structurally sound and visually consistent instead of patching it with whatever’s on a supply-house shelf. Luca Romano, who owns Sawyer Remodel San Antonio and provides Jerith Construction in Alamo Heights, TX, insists on this because he’s watched too many “matching” repairs turn into mismatched sections that sag and rattle within a year.
Every Jerith job we quote comes with The Relay Standard: a written price before work starts, live arrival time tracking, and before-and-after photo updates. We warranty every repair in writing, and our 365-Day Done Right Promise means if it’s not done right, we make it right. No argument, no phone tag.
Styles & brands we work with
Common Jerith Construction Problems We Fix in San Antonio
Here’s what we actually see on Jerith fences across this city. These aren’t theoretical failure modes from a spec sheet – they’re the repair calls we take week after week.
- Gate sagging on Jerith pool fences. The latch side gets slammed daily, and if the original installer drove self-tapping screws into the aluminum post instead of using through-bolts, the holes strip out. The gate drops, drags on the concrete, and stops latching. On most Jerith pool fence models, the hinge screws are threaded into the post wall itself – once those threads go, the gate’s only hanging on the top hinge.
- Pickets loosening at the bottom rail. Older Jerith residential aluminum fences rely on a crimp or snap-in picket design that can work loose after years of thermal cycling. San Antonio’s 100-degree summers expand the aluminum; winter cools it. That repeated movement eventually rattles the pickets out of the bottom rail, especially on long flat-top sections exposed to full sun.
- Powder coat chalking and fading. South-facing Jerith fences in San Antonio take direct sun for six-plus hours a day, eight months a year. Within 5 – 7 years, the factory powder coat chalks and fades from black or bronze to a dull gray. The fence is still structurally sound, but it looks tired. We can recoat it or replace sections where the finish has fully degraded, and we’ll tell you honestly which one makes sense for your run.
- Steel posts rusting at the concrete interface. This is the one that scares people. Where a Jerith ornamental steel post meets the concrete footing or the slab, water pools after rain or irrigation. That water sits at the base, the powder coat eventually micro-cracks, and rust starts eating the post from the outside in. Over a few wet seasons, the wall thickness thins enough that a strong wind shear snaps the post clean at the base.
- Roller coaster fence lines on expansive clay. On the northwest side – Alamo Ranch, Helotes, and up toward Boerne Stage Road – the clay heaves so dramatically during drought cycles that entire Jerith fence runs develop waves. Posts that were set level now crown or dip by several inches. This isn’t a Jerith defect; it’s the soil. The fix often involves resetting posts on deeper footings or adding root barriers to slow moisture migration under the fence line.
Jerith Parts & Our Repair-vs-Replace Approach
When a Jerith fence needs parts, we look at three things: what’s still manufactured, what’s dimensionally compatible, and what’s actually going to hold up in San Antonio conditions. Genuine Jerith parts – pickets, rails, spring hinges, gate kits, and post caps – are always our first choice. We keep a rolling inventory of common Jerith components in our San Antonio shop so we’re not waiting on a distributor for basic repairs. That means most gate repairs and section replacements happen in one visit.
For older Jerith lines where the specific extrusion has been discontinued, we won’t wedge in a generic part that’s “close enough.” We source 6005-T5 aluminum from the same mill spec and machine or fabricate it to match the existing profile. It reads as OEM to the eye and performs the same structurally.
Where does repair stop and replacement start? If a fence is over 15 years old and you’re chasing multiple failed sections – stripped pickets, rusted rails, a snapped post and a tired finish – we’ll say so. Replacing the whole run often costs less per linear foot than three or four repair visits spread over two years, and you end up with a fence under a single warranty instead of a patchwork of patches. Call (432) 547-6806 and we’ll give you both numbers – repair and replace – so you can decide with the actual costs in front of you.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We inspect the entire run, not just the section you pointed to. On a Jerith pool fence with a sagging gate, that means checking every hinge post for stripped threads, every latch for alignment, and the footing for movement. On a rattling fence, we trace which pickets have lost their grip at the bottom rail and whether the rail itself has lost rigidity.
- 2
Written quote. You get a line-item price in writing before we do anything. That covers parts, labor, and any concrete or footing work. The number on the invoice is the number you approved – no change orders because we “found something.”
- 3
Repair or install. Genuine Jerith parts first. Discontinued profiles get matched 6005-T5 fabrication. Posts get through-bolts, not self-tapping screws. Steel post bases get sealed and sleeved so water can’t pool at the concrete.
- 4
Test. Gates swing level, latch without dragging, and don’t sag under load. Pickets are tight. The powder coat or touch-up finish is consistent. A sagging gate gets weight-tested, not just eyeballed.
- 5
Warranty. Every Jerith repair we do is covered by our 365-Day Done Right Promise in writing. If it fails within a year, we come back and make it right. No argument.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in San Antonio
We work on the full Jerith aluminum and steel line. That includes the Jerith Residential Aluminum Fence in both spear-top and flat-top styles, the heavier Jerith Industrial Aluminum Fence for commercial and high-wind applications, and Jerith Ornamental Steel Fence with its welded steel picket systems. We also install and repair Jerith Pool Fence – the code-compliant aluminum pool barrier that most San Antonio HOAs and the city require around any residential pool, even above-ground setups in some neighborhoods.
Locally, we stock common Jerith picket profiles, bottom and top rails, gate hinge kits, spring hinges, latches, and post caps. For storm damage calls after hail or high wind, that quick access to parts is the difference between a one-visit fix and a seven-day wait.
We Also Service These Brands
Jerith is a big part of our fence work, but it’s not the only name we trust. We also install and service KraftMaid and other major cabinet lines, Cambria and Silestone countertops, and Kohler fixtures across our broader remodeling projects in San Antonio. That multi-brand depth means we’re not pushing Jerith because it’s the only product we know – we’re recommending it because it’s the right fence for your property.
FAQs – Jerith Construction Service in San Antonio
The pickets have worked loose from the bottom rail’s crimp or snap-in channel, which happens when repeated thermal expansion in San Antonio’s heat cycles the aluminum enough to release the factory grip. We re-seat the pickets and, on older Jerith residential fences, add a mechanical fastener or reposition the rail to restore rigidity. Call (432) 547-6806 for a free inspection – this is usually a one-visit fix.
Most Jerith powder-coat finishes chalk and fade within 5 – 7 years on south-facing runs in San Antonio, turning from black or bronze to a flat gray. The fence doesn’t need repainting to stay functional, but if the chalking bothers you or the finish has degraded to bare metal in spots, we can recoat or replace affected sections. Call (432) 547-6806 and we’ll tell you what your run actually needs after we see it.
Usually, yes. The snap is almost always at the concrete interface where water pooled and rusted the post from the outside in. We remove the broken section, cut back to sound metal, sleeve the post internally with a steel stiffener, and reinstall with a sealed base so water can’t pool again. If the rust has spread through the entire post, we replace it. Call (432) 547-6806 for a quote – we’ll give you both options in writing.
Yes. For current Jerith lines, we order the exact picket profile and rail extrusion to match. For discontinued profiles, we fabricate matched 6005-T5 aluminum from the same mill spec so the section blends with the rest of the run. Color may need a recoat on the new section to align with whatever the sun has done to the rest of the fence. Call (432) 547-6806 and send us a photo – we’ll tell you exactly what’s matchable before we quote.
It depends on the repair. San Antonio pool barrier code requires the fence to be a minimum height, with proper spacing between pickets and a self-closing, self-latching gate that opens outward. Any Jerith pool fence repair we do is brought back to current code: gate springs re-tensioned, latches reinstalled at proper height, picket spacing verified. If a repair can’t be made code-compliant, we’ll tell you that in writing and quote a replacement section. Call (432) 547-6806 for a code check on your existing fence.
Jerith aluminum fence installation typically runs $4,000 – $10,000 depending on linear footage, gate count, and whether we’re setting posts in the native clay or drilling deeper footings on the northwest side. Storm damage repair to a Jerith steel fence, including section replacement, runs $800 – $2,500. A simple gate re-hang is less. Call (432) 547-6806 for a written line-item quote – estimates are free.
Book Your Jerith Service in San Antonio, TX
If your Jerith fence is sagging, rattling, rusted, or just showing the San Antonio sun’s age, call us at (432) 547-6806. We’ll give you a written price, show up when we say we will, and fix it right the first time.
Written by Luca Romano, Owner at Sawyer Remodel San Antonio, serving San Antonio since 2005.
