Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The San Antonio Owner’s Guide
A full PGT bathroom remodel in San Antonio runs $9,000 to $28,000 installed, with most homeowners landing between $12,000 and $18,000 depending on shower glass, tile footage, and whether we’re moving plumbing. We stock PGT-compatible hardware and glass on our trucks, so we can often start the tear-out within a week of your written estimate. Most San Antonio owners call us because a shower door has started dragging, a hinge has loosened to the point of leaking, or the frame shows corrosion from years of hard water that no amount of CLR will fix.
Here’s the thing about PGT bathroom components in this climate: San Antonio’s water is hard enough to etch glass and eat through cheap seals. The failure usually starts small, a drip at the corner, a door that doesn’t close square, and by the time you notice it, the subfloor or drywall behind the tile has been taking water for months. That’s why we treat a failed PGT part as a remodel trigger, not just a parts swap. The part is the symptom. The water behind it is the project.
Which PGT Models This Applies To
PGT built its name on impact-rated windows and doors, and in bathrooms that means framed and frameless shower enclosures, fixed panel systems, and sliding door assemblies cut to the opening. The compatibility gotcha we see weekly in San Antonio: PGT’s frameless hardware uses a specific hinge geometry that doesn’t match knockoff pivot brackets from the big box stores. The glass thickness is another spec that matters. PGT frameless panels run 3/8″ or 1/2″ tempered glass, and the hinge plates and clamps are machined for that exact thickness. Use a bracket rated for 5/16″ glass and you’ll get a door that sags within a year.
To identify your assembly, look for the etched PGT logo in a corner of the glass, usually near the bottom hinge or on the fixed panel. There’s often a serial number etched alongside it. If the logo is gone, measure the glass thickness with a caliper and check the hinge style: PGT uses concealed screw mounts on their premium lines and exposed barrel hinges on their builder-grade series. We match OEM first, and when the OEM part is discontinued, we source a machined aftermarket equivalent that matches the hole pattern exactly. We’re an independent contractor, not a PGT dealer or affiliate, and we’ll tell you plainly when the aftermarket part is a better call than paying OEM markup for a five-year-old design.
Styles & brands we work with
Signs Your PGT Bathroom Remodeling Is Failing
- Shower door drags or scrapes the threshold. The hinge has worn to the point the door is no longer carrying its weight, or the header has shifted. In San Antonio, slab foundation movement over clay soil shifts door openings by fractions of an inch every dry summer, and the door tells you first.
- Water pooling at the outside corner of the shower. The sweep or side seal has compressed or crusted over. Hard water deposits accelerate this badly around the 5- to 7-year mark on PGT enclosures in San Antonio homes.
- Green or dark staining at the base of tile outside the shower. This means water has been wicking past the curb or through failed grout for months. By the time the stain shows, the damage behind the tile is already underway.
- Hinges or frame show white corrosion or pitting. Mineral buildup plus the humidity of a Texas bathroom equals electrolytic corrosion on plated hardware. It starts ugly, then the hinge binds, then it fails.
- Glass has cloudy etching you can’t remove. That’s permanent mineral damage from San Antonio’s water. No product reverses it. The fix is replacement glass, which is when we talk about whether the whole enclosure still makes sense.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re just replacing a PGT shower door panel or a set of hinges, you’re looking at $800 to $2,500 installed in San Antonio. A full PGT-compatible bathroom remodel, which is what most of these failures point toward, lands at $9,000 to $28,000. Here’s what moves the number:
- Glass footage and panel count: A single swinging door is the low end. A full custom enclosure with a fixed panel and transom pushes material costs up fast.
- Tile and waterproofing scope: If water has already reached the subfloor, we’re pulling tile, replacing backer board, and re-waterproofing with a Schluter membrane. That’s the difference between a $9,000 refresh and a $20,000 rebuild.
- Moving plumbing or drains: Keeping the shower footprint as-is saves thousands. Moving a drain line across a slab is real money.
Every quote we write in San Antonio includes a line-item parts and labor breakdown, the written price before work starts, and our 365-Day Done Right Promise: if it’s not done right, we make it right. That’s in writing, on every job we do since 2005, no argument.
DIY or Call Us?
You can check a few things safely on your own. Check that hinge screws are snug (but don’t crank them, the glass will crack). Look for visible corrosion on the hardware. Test the door swing and see where it binds. Cleaning the track and sweeps is fine too. What you shouldn’t do is try to remove or reset tempered glass. PGT panels are heavy, usually 80 to 150 pounds, and tempered glass shatters into a thousand pieces when it goes. A dropped panel isn’t a cut finger, it’s a hospital trip.
If the frame is out of square or the hardware is corroded, the fix isn’t a YouTube video. It’s a call to (432) 547-6806 and a free estimate on the actual fix. We’ll tell you if it’s a $300 hinge job or a $15,000 remodel, and we’ll put the number in writing before anything gets ordered.
FAQs
A well-installed PGT enclosure lasts 12 to 20 years in San Antonio, but the hardware fails earlier, usually between 7 and 10 years, due to hard water corrosion and humidity. The glass itself will last indefinitely unless it’s scratched or etched. Call (432) 547-6806 and we’ll tell you whether you’re replacing hardware or glass or both, and what it costs.
Yes, in many cases the repair is hinges, sweeps, seals, or a single replacement panel, and that’s an $800 to $2,500 job in San Antonio. The remodel conversation only starts when the water has already gotten behind the tile or the frame itself is corroded. Call us for an honest read on which one you’re looking at.
A hardware swap or single panel replacement is a one-day job. A full bathroom remodel runs 2 to 5 weeks depending on tile scope, plumbing moves, and glass lead time. We give you a written timeline with the estimate, and you get photo updates before and after every phase through The Relay Visibility Guarantee.
We stock the most common PGT hinges, sweeps, seals, and clamps on our trucks, because we’ve been working on San Antonio bathrooms long enough to know which ones fail. Obscure or discontinued items get ordered and arrive within a week. Call (432) 547-6806 with your model info and we’ll check the truck before you schedule.
Written by Luca Romano, Owner, Sawyer Remodel San Antonio at Sawyer Remodel San Antonio, serving San Antonio and nearby areas.
