Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Fence Installation: The San Antonio Owner’s Guide
Schluter fence installation in San Antonio typically runs $3,500 to $9,000 installed, depending on linear footage, gate count, and whether we’re pulling old fence or starting fresh. Most homeowners call us the day they notice a gate dragging or a post leaning after a storm, and we can usually get eyes on it within a day or two. The part itself matters less than the install, but Schluter’s Kerdi-Board and Ditra products show up in fence work more often than people expect, especially where a fence meets a house or a retaining wall needs waterproofing behind it. If you’re holding a failed part or standing in front of a sagging section, this page tells you exactly what’s involved and what it costs.
Key takeaways:
- Installed Schluter fence work in San Antonio lands between $3,500 and $9,000 for most residential jobs
- We stock Schluter-compatible trim, edge profiles, and waterproofing strips on the truck for fence-to-structure transitions
- Written price before any work starts, no change orders, no surprises
- 365-Day Done Right Promise covers the install, in writing, for a full year
Which Schluter Models This Applies To
Schluter’s product line divides into tile edging and waterproofing systems, and when it comes to fence installation, we’re usually dealing with the RONDEC, QUADEC, or JOLLY edge profiles where a fence post base meets a concrete pad or a stucco wall. The part number is stamped on the back of the profile flange, usually a six-character code like RO 80 AE or Q 100 M. If you can read it, great. If not, measure the exposed face width in millimeters and we’ll match it. Schluter profiles come in 8-foot and 10-foot lengths, with aluminum, stainless, and PVC options. The aluminum versions hold up fine in San Antonio’s dry heat, but the PVC ones crack faster than you’d think after a few summers of direct sun.
One compatibility gotcha: Schluter’s older Jolly profiles had a slightly different anchor leg than the current generation, and mixing them mid-fence line leaves a visible step at the seam. We’ve seen DIYers buy the wrong profile online and end up with a wavy transition where the fence meets the house. For fence-specific work, OEM Schluter is worth the premium over aftermarket because the color consistency across batches is better, and the anchor leg thickness matches what was originally spec’d. Sawyer Remodel San Antonio is an independent service provider, not affiliated with Schluter, but we’ve installed enough of it to know which profiles play well together.
Styles & brands we work with
Signs Your Schluter Fence Installation Is Failing
- Post lean after a hard rain. San Antonio’s clay soil expands and contracts, and posts set in concrete still shift when the ground saturates. If a post leans more than a few degrees, the Schluter profile at the base is now bearing load it wasn’t designed for.
- Gate drags or won’t latch. The hinge post has moved, or the gate frame is racking. When a gate drags, the edge profile where the gate meets the house trim takes the hit first, bending or pulling loose.
- White residue or pitting on metal profiles. This is galvanic corrosion, common where aluminum Schluter touches treated lumber or salt-treated concrete. Once pitting starts, the profile loses structural bite and starts separating from the substrate.
- Tile or stucco cracking where fence meets house. That joint is where water gets in, and Schluter’s waterproofing strip is the line of defense. When it fails, you see hairline cracks radiating from the attachment point within a season or two.
- Profile pulling away from the wall or slab. The thinset bond has failed, usually from water intrusion or freeze-thaw cycling. If you can slide a putty knife behind the flange, it’s time to replace it before the substrate rots.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Antonio homeowners, here’s what Schluter fence installation pricing actually looks like:
- Single post base profile replacement: $180 to $400, including profile, fasteners, and reseal
- Full fence-to-house transition (up to 20 linear feet): $800 to $2,200
- Complete fence install with Schluter transitions and two gates: $3,500 to $9,000
- Removal and disposal of old fence: $400 to $1,200, depending on length and dump fees
The range breaks down by gate hardware quality, post depth, and whether we’re working on a slope. San Antonio lots in Alamo Heights and Terrell Hills often have grade changes that require stepped fence panels, which adds labor. Every quote includes the part, the labor, the fasteners, and the waterproofing reseal at the transition points. The written price is the price, and the 365-Day Done Right Promise means if anything shifts or separates within a year, we come back and fix it, no invoice.
DIY or Call Us?
You can safely check whether the profile is the original Schluter or a cheap aftermarket by looking at the back for the stamped part number. You can also check whether the post is actually moving by spraying a line of water at the base and watching if the gap opens when the ground dries. What you shouldn’t do is pull the post yourself if it’s set in concrete near a gas line or an irrigation main. That’s the one where we’ve seen homeowners nick a line and turn a $400 profile replacement into a $4,000 utility repair. Digging around fence posts in San Antonio means dealing with caliche, and caliche laughs at a post-hole digger from the big box store. If the profile is just loose, that’s a half-hour fix. If the post is moving, call us at (432) 547-6806 before you dig. The craft comes first. Everything else follows.
FAQs
A properly installed Schluter profile at a fence transition lasts 15 to 20 years in San Antonio’s climate, but the fence itself needs post checks after every wet season. The weak point is always the bond between profile and substrate, not the metal itself. Call (432) 547-6806 if you’re seeing separation now.
If the profile is loose but intact, yes, we can re-bed it with fresh thinset and reseal the joint, usually for $180 to $400. If the metal is pitted, bent, or the anchor leg is torn, replacement is cheaper than patchwork. We’ll tell you which one you need before any work starts.
A single profile replacement takes half a day. A full fence install with Schluter transitions and two gates takes two to three days on most San Antonio lots, with a third day if we’re removing old concrete footings. You’ll get a written timeline with the quote.
We keep the common aluminum profiles, corner pieces, and waterproofing strips on the truck for fence-to-structure transitions. If your project needs a less common finish, like the brushed bronze, we order it and have it in hand before the install date. We also stock parts for KraftMaid, Cambria, and Silestone on our remodel side, so if it’s a fence-plus-hardscape job we can handle it in one visit.
If your Schluter fence installation is failing, don’t wait for the next storm to make it worse. Call Sawyer Remodel San Antonio at (432) 547-6806 for a free estimate. Luca Romano and the crew will show up, measure what’s there, and put the price in writing before a single tool is picked up.
Written by Luca Romano, Owner, Sawyer Remodel San Antonio at Sawyer Remodel San Antonio, serving San Antonio and nearby areas.
